Flash Firmware Wiko U Feel Prime (P7201) Via QFil

Baca Juga

Wiko U Feel Prime (P7201)

MATERIALS REQUIRED

    TUTORIAL
    • Download and extract the materials required above
    • Install driver (skip this step if it has been installed before)
    • Open program QFil in the flashtool folder 

    • Shut the phone completely off and connect to computer while pressing the Volume (+) / (-) button simultaneously until device is detected QDLoder 9008 (different phone comes with different methods. However the phone must boot in to QDLoder 9008 mode)
    QDLoader 9008 QFil 2

    • Click Browse and insert file prog_emmc_firehose_xxxx.mbn in the extracted firmware folder (different phone comes with different names)
    QFil 3

    • Now click Load XML insert file rawprogram_unsparse.xml followed by selecting the file patch0.xml (different phone comes with different names)
    QFil 4

    • Next click Download button and the flashing process will begin automatically
    QFil 5

    • Wait until the flashing process finishes 100%
    • Please try to turn on the phone and good luck .. :)


      We Have Reached The End About Flash Firmware Wiko U Feel Prime (P7201) Via QFilThank You For Visiting And Pelase Do Leave A Comment Below If You Like, Share It Or Subscribe For More. May Luck Be With You All As Always..


      EmoticonEmoticon